Crew
1 robot + 1 worker
The smallest suggested crew in the range: one robot working with one person.
The Smart Floor Surface Specialist
Floor Grinding Robot
Autonomous grinding with built-in 100 L dust collection, for car parks, workshops and halls.
The Floor Grinding Robot is designed for automated floor grinding, surface treatment and dust collection in large indoor facilities. The manufacturer lists underground car parks, factory workshops, laboratories and sports venues as applications.
It combines autonomous path planning, environmental perception, compatible grinding discs and an integrated dust collection system, to standardise floor preparation and reduce repetitive manual grinding.
- 780 mmgrinding width
- 100 Lintegrated dust bin
- 1 + 1robot and one worker
Manufacturer-stated figures. Results depend on the site.
Why contractors choose it
What this machine does for your crew
Coverage
Autonomous route planning
The robot plans its own grinding route and works around pillars. Stated coverage is above 95 %.
Dust
Integrated 100 L dust collection
An automatic dust bin collects debris as the machine works, which cuts how often it has to be emptied.
Quality
Consistent grinding pressure
Machine weight and the grinding-head design keep contact with the floor and improve consistency.
Versatility
Square and round discs
Quick-change interfaces take both disc types, for concrete hardener, dry-shake hardener and epoxy floors.
Power
Plug-in, AC 380 V, 25 kW
Runs on site power rather than batteries, so it works as long as the job does.
Suggested crew
1 robot + 1 worker
The manufacturer’s suggested operating configuration. The machine does the repetitive spraying or grinding; your people supervise and supply material.
Built-in capabilities
Autonomous path planning
Designed to plan grinding routes and navigate work areas.
Integrated dust collection
An automatic 100 L dust bin collects grinding debris and reduces how often it must be emptied.
Compatible grinding discs
Quick-change interfaces support both square and round grinding discs.
Preloaded downforce
Machine weight and grinding-head design are intended to keep contact with the floor and improve consistency.
Specifications
Manufacturer-stated values. Descriptions are design intentions, not guaranteed results.
| Dimensions | 2,450 × 960 × 1,750 mm |
|---|---|
| Weight | 1,250 kg |
| Power supply | Plug-in operation |
| Working voltage | AC 380 V |
| Rated power | 25 kW |
| Dust collection bin | 100 L |
| Grinding width | 780 mm |
| Working speed | 0.1–0.5 m/s |
| Stated coverage | More than 95 % |
| Suggested operation | 1 robot + 1 worker |
Typical applications
- Underground car parks
- Factory workshops and laboratories
- Sports venues and other large indoor floor areas
Floor types listed by the manufacturer
- Concrete hardener floors
- Dry-shake hardener floors
- Epoxy floors
